The bathroom is one of the most unsafe places to install electrical wiring. In the conditions of modern technology, it is simply not possible to do without electrical appliances in the bathroom, and therefore it is necessary to know everything about the features of laying hidden wiring in the bathroom.Starting repairs in the bathroom, before facing work and installing all the necessary attributes, the first thing to do is to lay the wiring cables into the wall sheet.
Preparation for laying hidden wiring should begin with marking the sockets, under the boxes of switches and sockets. Further, for switches and sockets, it is necessary to punch passage holes in the walls. In the nests prepared for them, the boxes should be visible from the wall at a distance that is equal to the thickness of the layer of further plaster.
Laying wires consists in cutting the required length of wires, while leaving a margin of up to twelve centimeters in each direction. Further, the wires are necessarily fixed along the entire section of the wall with the foot of the brackets.
Alabaster tubercles made along the entire length of the wires will not be visible above the layer of further plaster if you press them down with a feeder a couple of minutes after laying until the wire insulation is reached. And you can already put wires in boxes. Concealed wiring ready for plastering.
There is another way: to lay hidden wires on plastered walls. To do this, you need to make strobes in the plaster. The advantages of this method include easy laying of wires, simple lining of mounting boxes – you just need to simply prepare the mounting sockets before applying the plaster. After painting the plastered walls, you need to connect the wires laid in the boxes and install sockets and switches.
In new residential buildings, wires are sometimes laid in electrical skirting boards, which are long narrow pencil cases, which are divided into cells by a number of longitudinal partitions. Such skirting boards with covers are made of almost fireproof plastic. In order for the wire to be perfectly terminated, you only need to close the cover by connecting it to the springy walls.